Quick Start Up Instruction:

1.Open the attractant bag, take out the attractant, use a sharp object to penetrate the holes on cap (open as much as you could), and place the attractant into the machine.

2.Put the Maxttrac at suggested location,the side with attractant facing upward .

3.Connect the power source, and please use only the provided DC power adaptor.
4.The machine is operating normally if the fan starts and the LED light turns on.
5.It is suggested to change the attractant and clean the machine every 30 days.

How to clean?

Clean the net:
1.Turn anti clockwise to remove net.
2.Throw away dead mosquitoes and clean the dust.
3.Turn clockwise to re-insert net into trap.

Clean the Machine:
There will be a layer of dust on the LED lights and fan after 2-3months use of the machine, which may impact the effective. Please use the brush we provided to clean the dust on the fan and LEDs.

Please follow the steps below to clean Uno Plus (TM05):
1. Remove the emboli with a needle-nose pliers or similar tool. Turn anti clockwise to remove the ring and the upper parts.
2. Use the brush to clean the dust on the fan and LEDs.
3. Turn clockwise to re-insert the ring and the upper parts. then Re-insert the emboli.

Remarks: The upper part of Uno Max is non-removable, please remove the net and clean dust on fan from lower end of the trap body.

Caution:

1.Leave it on for 24/7 for maximum impact.
2.Do not let children touch the machine.
3.Please do not look at LED straight in the eye to prevent damages to the eyes.
4.Clean the net and machine and change the attractant every 30 days.
5.The attractant is harmless, but do not consume .
6.Please turn off the machine before cleaning the machine.
7.If the net is damaged, please contact the retailer and change it right away.